AlphaVision 16 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Панель керування AlphaVision 16. AlphaVision 16 12 сторінок.

01: 111111 lev 4

ABCDEFGH smtwtfs

The A has been replaced by a point. If again key <1> is pushed, the point changes to A. The keys <2> to <8>

change the characters B to H. The characters shown correspond to the sections for which this PIN-code is

autorized. In this example we assume that PIN-code 01 is autorized for sections A and B.

Push key <#> when the correct sections are shown on the screen.

01: 111111 lev 4

ab...... SMTWTFS

Notify: ab...... is now shown in small characters, while the days are shown in capitals. The days are now selected

to be changed. If the user of PIN-code 01 is not allowed to arm/disarm on sunday and saturday, push ones at key

<1> the first S (from sunday) changes to a point and push ones at key <7> the last S (from saturday) changes to a

point. The LCD will give the following information:

01: 111111 lev 4

ab...... .MTWTF.

Push key <#> and the capitals MTWTF change to small characters:

01: 111111 lev 4

ab...... .mtwtf.

At this moment the programming of PIN-code 01 has been completed and is it possible with key <

PIN-code 02.

Notify: the days are given in the following order: sunday, monday, tuesday, wednesday, thursday, friday and

saturday. A week officially starts on sunday and ends on saturday.

Notify: to program 2-digit codes, the first two digits of the desired code must be programmed and the following

digits must be of the value 0. When the code 99 is desired, it will be programmed as 990000. Using 5-digit PIN-

codes this will be programmed as 99000 and using 4-digit PIN-codes as 9900. The level of a 2-digit code must

always be 1 !

To delete a PIN-code the programmed code must be changed to 000000.

F7# Start engineermenu

The engineer will use this function to program the control panel. Do not use this function, unless it is asked by the

installer.

The installer can ask to execute this function. By doing this, the installer can remotely get into contact with the

control panel and make modifications if necessary. Do not use this function, unless it is asked by the installer.

Push the keys <?> <8> <#> followed by a PIN-code of level 5.

On the display appears the message:

Start up/down-

loading? (#=yes)

User manual AlphaVision 16/96 *** 21 augustus 2003 ***

Because ABCDEFGH appear in capitals, it is possible to change them.

If key <1> is pushed ABCDEFGH will be changed to .BCDEFGH.

> to switch to

Page 9