Nikon KEYMISSION 170 Посібник із швидкого старту - Сторінка 32
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Цифрова камера Nikon KEYMISSION 170. Nikon KEYMISSION 170 48 сторінок.
Також для Nikon KEYMISSION 170: Посібник з підключення до Wi-Fi (3 сторінок)
Друкувати сторінку
3
Adjust the camera angle.
Loosen the plate lock (1), set the camera angle
(2), and then tighten the lock (3).
4
Make sure that there are no foreign substances on the surface to
which the base mount will be attached.
If there are foreign substances such as dust or water, remove them.
5
Peel off the release liner from the back of the base mount, and
firmly press the base mount so that the entire surface is attached.
Base Mount
The base mount is an accessory that is used to easily attach and detach a base adapter
mounted with the camera.
Attach the base mount to places where you want to mount the camera.
Use the flat or curved type depending on the surface to which the base mount will be
attached.
The base mount is not designed for use on vehicles. Do not attach it on vehicles.
Base mount (flat):
Use to attach to flat surfaces.
Base mount (curved):
Use to attach to curved surfaces such as helmets.
B
Notes About Using the Base Adapter and Base Mount
Do not use the base adapter and base mount so that they are subjected to sudden loads,
such as directly attaching them to skis or snowboards. Subjecting them to sudden loads
will damage the accessories or detach the base mount.
You cannot reuse a base mount after it has been attached and then removed.
The surface may be damaged or the paint may peel off depending on the material to
which the base mount is attached. Care should be taken when attaching the base mount.
The base mount is not suited for attachment to surfaces made of rough material such as
wood or concrete.
20
Using the Camera