Discount Car Stereo JAG-HF Посібник зі швидкого встановлення Bluetooth - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення Bluetooth для Автомобільна стереосистема Discount Car Stereo JAG-HF. Discount Car Stereo JAG-HF 10 сторінок. Bluetooth kit for jaguar xk and xj with cd changer
Також для Discount Car Stereo JAG-HF: Посібник з монтажу (10 сторінок), Посібник із швидкого старту (10 сторінок)

PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
Introduction:
Safety comes first when you're on the road, so having an intuitive and easy to
use Bluetooth kit is essential to reducing driver distraction. The JAG-HF kit is
compatible with virtually all Bluetooth phones, and sounds great whether you are
using it for mobile conversations or streaming music. In addition to Bluetooth,
the JAG-HF provides a 3.5mm Audio input which can be used to connect
and play audio devices such as MP3 Players, iPods, Zune, iPads etc. (this
audio input replaces CD changer playback). The built-in USB charging port
can be used to charge devices (2A), however for larger current hungry devices
(e.g., iPhone 8 and newer), we recommend adding optional
Charge" kit. The AUX audio adapter connects at changer in trunk or hatch and
Bluetooth module installs beneath center console glove box (armrest).
CD changer required, remains connected but will no longer play.
CD changer playback, purchase our
See Frequently Asked questions at the end of this guide
Audio module Installation:
Remove carpet trim piece surrounding audio rack
1.
Remove (4) 8mm nuts securing rack to vehicle.
2.
wiring and connections are behind the units
3.
Locate single thick black cable from CD changer (connects changer
4.
to Amplifier in premium systems or radio in standard systems)
(See Fig. 1)
USB-DMA3
"Fast
To retain
JAGCD-HF
instead.
Noteworthy: There are similar size/color cables in this area. The
single thick black cable from changer chassis is the correct one.
Fig. 1
Remove cable from holding tab and disconnect by grasping both plugs
5.
and gently pulling apart
(do not twist)
Once disconnected; note Fig. 2- CD changer female connector (right),
6.
amplifier/radio plug (left).
Fig. 2
Connect audio module right angle plug (See Fig. 3) to CD changer
7.
connector.
Note: Module right-angle plug (See Fig. 3) does not have an alignment
arrow indicator; however, the imaginary arrow (See Fig. 3) must be
opposite arrow indicator on factory CD changer connector. Once
aligned mate both
(do not
twist).