Discount Car Stereo JAGCD-HF Посібник зі швидкого встановлення - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Автомобільна стереосистема Discount Car Stereo JAGCD-HF. Discount Car Stereo JAGCD-HF 12 сторінок. Bluetooth kit for jaguar xk and xj with cd changer
Також для Discount Car Stereo JAGCD-HF: Посібник з монтажу (10 сторінок)
Друкувати сторінку2. Connect 6-pin audio splitter plug (See Fig. 13) to audio cable 6-pin
connector (routed from trunk/hatch)
3. Connect audio splitter straight 3.5mm plug (See Fig. 13) to Module
input jack labeled (CD) (See Fig. 14)
Audio Jack in center
4. Connect audio splitter right angle 3.5mm plug (See Fig. 13) to module
pigtail jack (See Fig. 15)
Note: Older version of the audio splitter may have these functions reversed. If
there is no audio playback or if audio is low/distorted it's likely because these
are reversed and the right-angle plug must be connected to the "CD input
instead of pigtail jack.
Fig. 13
Audio splitter
Fig. 14
Fig. 15
pigtail jack
5. Connect microphone/push-button (See Fig. 16) to Module mic input
jack (See Fig. 14)
Fig. 16
Control button/Microphone
6. Consider where to install control button/mic. The microphone is built-
in and must be facing forward for voice commands and phone dialog
(cable is 6ft. long). We recommend completing the remainder of
the install prior to securing the button. Once settled on location,
remove tape backing (See Fig. 17) and stick to dash (See Fig. 18)
or purchase our
G2-HF
visor kit which allows microphone to be
mounted separately. See Optional Microphone/control button
installation kit at the end of this guide.