DiscountRamps TBSR-72 Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автомобільні аксесуари DiscountRamps TBSR-72. DiscountRamps TBSR-72 4 сторінки.
Друкувати сторінку
STEP 1. Place the left and right longitudinal beams (1, 2) on the right side of the pickup bucket, as shown
in figure I, to see if drilling is needed, if you need to drill,confirm the drilling position first, remove the
left and right longitudinal beam (1, 2) .Drill the diameter of 13 hole with the hand electric drill,then
assemble right longitudinal beam(1),With the outer hexagonal bolt full thread (4)into the 12 Spring
washer (5), 12 large flat washer (6), the right longitudinal beam (1) on the U-type mounting plate (3) in
turn, all bolts tightened and fixed. The left longitudinal beam (1) is installed the same as the right one
as shown in Fig.1.
Fig.1
3