DISCOVER Adapt 30 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Гарнітури DISCOVER Adapt 30. DISCOVER Adapt 30 6 сторінок.
Також для DISCOVER Adapt 30: Посібник користувача (17 сторінок)
Друкувати сторінку
Setting up the Base
Handset Port
Telephone Port
DC Jack
AUX Port
Operating Instructions
• Plug the Power Adapter DC Jack into the back of the Base Unit. (See Note 1 below)
• Press the Hook On/Off switch to make a call
• Select compatibility switch position '1' or '2' until you can hear the dial tone
• Adjust speaker and microphone volume to suit your requirement
• Press the Hook On/Off switch to end a call
Note 1 : Factory default setup : Pairing
• Place the headset on the cradle
• Plug the power adapter into the base unit (Pairing starts automatically as soon as you plug
the power adapter into the Base Unit) The Tel indicator will start to flash.
• Press the 'mute button' of the headset until the LED of the headset starts flashing.
• Once pairing has completed, you will hear a beep sound and the LEDs of the base and head-
set will be off.
(Make sure that the headset is placed on the cradle before power is turned on. If the headset is not
placed on the cradle, pairing will be unsuccessful).
Desk Phone with Headset Port
• Plug the supplied telephone cord into
the TEL port of the BASE UNIT
• Connect the telephone cord to the
HEADSET port of the desk phone
Desk Phone without Headset
Port
• On the desk phone, unplug the
handset cable from the phone
• Plug the handset cable into the
HANDSET port on the BASE UNIT
• Plug the telephone cord into the TEL
port on the BASE UNIT and plug the
other end of the telephone cord into
the HANDSET port on the desk phone
Base Unit
Bluetooth
PC/TEL
Pairing Button
Selection
Bluetooth Button
This function works when the Bluetooth module is inserted
PC/TEL Selection
This function works when the USB cartridge is inserted
Microphone Mute Button
Press to mute the call
Microphone Volume
Your headset has automatic audio configuration, (this can take
a few minutes to settle) however, if required, you can adjust the
volume level for the speakers and microphone to suit
Compatibility Switch
Select '1' or '2' until a dial tone is heard via the telephone
connection
DC Jack
AUX Port
DC Jack
Connect Power Adapter to DC Jack
AUX port
Connection for Handset Lifter or EHS Adapter (optional extra)
Telephone Port
Connect telephone cord to the headset port or handset port
of a telephone / base unit
Handset Port
Plug Handset cord from the phone to Handset port
Microphone
Volume
Microphone
Mute Button
Compatibility
Switch
Handset Port
Telephone Port
Mini 'B' USB/
Bluetooth Module
Drawer