DISCOVER D904 Посібник - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник для Гарнітури DISCOVER D904. DISCOVER D904 19 сторінок.

On the CD-Rom that came with your headset you

will find Vidicode demo call recording software

which can be used for this purpose.

To activate the recording option hold the PC/USB

switch (8) for four seconds. Both LEDs of the

PC/USB (8) and TEL (7) buttons will light. The D904

is now ready for use with recording software. If

one of the buttons is touched again this function

will be switched off and the headset will return to

the mode of the button pressed.

Troubleshooting

I have connected my headset base to my

telephone terminal but the headset is not

working.

Make sure that you have the removable battery

correctly fitted in the headset and that the

battery has been properly charged.

The headset is working but I cannot hear

telephone calls correctly.

Ensure that you have the correct wiring setting

by adjusting the switch (16) on the side of the

headset base.

When the headset's ON/OFF button (2) is

pressed, the handset lifter lifts the handset but

I cannot hear the call on the headset.

Ensure that the headset base is connected to

the telephone's handset port and not the

headset port (if the telephone has one).

Health and safety instructions

Please read the following safety and operational

in-structions before using your Discover Headsets

product. Please keep these instructions for your

reference. When using this product, these basic

safety precautions and warnings should be

followed to reduce the risk of fire, electric shock,

injury to persons and damage to property.

headsetadvisor.com | 1-800-683-5715