3D Hobby Shop Velox VR-1 Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Іграшка 3D Hobby Shop Velox VR-1. 3D Hobby Shop Velox VR-1 17 сторінок.

Remove covering on the bottom of the fuselage as shown for motor/battery cool air exit:

Assemble the wheel onto the aluminum wheel axles, fix with wheel collar, and slide axle assembly into

wheel pant as shown.

Assemble axle, wheel and pant onto landing gear leg as shown. Note that the carbon gear has a "front"

and "back" orientation, check the gear against the fuselage to find the "front" side. Slide the axle thread

through the gear leg. Apply locking nut. NOTE – The nut is self-locking. It will not "spin" onto the axle

thread easily. You will need to hold the axle with needle-nose pliers and tighten the nut as shown.