AROHA SM11W Короткий довідник - Сторінка 6

Переглянути онлайн або завантажити pdf Короткий довідник для Димова сигналізація AROHA SM11W. AROHA SM11W 20 сторінок.

Connect to your Wifi network

1. Make sure that your bluetooth is

activated and your Wi-Fi network

supports the 2.4GHz band

2. Scan the QR code on the right → or

search for the "Smart Life" app on the

Google Play or Apple APP Store and

install the application.

3. Open the "Smart Life" app and create

an account by following the instructions

4. Select the "Home" tab(

"Add Device"

Now you have 2 options:

a) press the test button on the smoke detector 4 times until the red light starts

blinking. The app should detect the smoke detector automatically.

b) If that doesn't work, Click the "Scan" button( ) in the upper right corner and

scan the QR code below.

There are a few simple steps you need do to keep it working properly:

1. Test the smoke detector once a month.

2. Do not paint the smoke detector. Paint will seal the vents and interfere with

the sensor's ability to detect smoke.

3. Never attempt to disassemble the smoke detector to clean inside. This will

damage the alarm.

4. Clean the smoke detector at least once a month to remove dust, dirt or

debris. Use a vacuum cleaner with a soft brush and vacuum all sides and

covers of the smoke detector.

Trouble Shooting

Problem

The smoke detector does

not sound when testing

Red LED flashes and the

smoke detector delivers

one beep every 60

seconds

) and click

Follow the instructions to complete the pairing

process. Please note you can skip the battery

question as your smoke alarm has already a

non-replaceable battery installed.

Please check whether the smoke detector is

activated.

The battery is low.

Method of disposal