3D Systems NextDent Wash Інструкція із застосування - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція із застосування для Стоматологічне обладнання 3D Systems NextDent Wash. 3D Systems NextDent Wash 5 сторінок.
Друкувати сторінкуPrecautions
•
Make sure that the NextDent Wash unit is placed on a flat, clean surface capable of
safely carrying the device.
•
Do not change the position of the wash container during operation.
•
Avoid spilling washing liquid into the main body of the NextDent Wash.
•
Use only authorized accessories (f.e. power cord).
•
Alcohol is: Use up to 99% isopropyl alcohol (IPA) or ethanol according the IFU of the
used resin.
•
Always refer to alcohol supplier safety data sheet (SDS) as the primary source of
information on storage and handling.
•
Alcohol is flammable and should be stored away from sources of ignition.
•
Wear gloves and handle alcohol in well ventilated areas.
•
Alcohol evaporates quickly, so keep the lid(s) closed whenever possible.
•
Do not modify: NextDent Wash is intended to be used as directed only.
•
Professional use only.
Maintenance
Cleaning
1. Remove the universal jig, mesh basket and stirrer partition from the wash container.
2. Clean the inside of the wash container using IPA or ethanol.
3. Wipe with a smooth and clean cloth after washing.
4. Assemble the separated accessories.
Safety Symbol
The following symbols are found on the device and this document.
Always use the equipment in the safest possible manner.
CAUTION: When moving the unit, be sure to turn off the power.
Environmental conditions
Installation: indoor
altitude: up to 2000 m
Operating Temperature / humidity: 5 - 40 ℃ / 20 – 80 %
Packaging
Be careful when opening the box.
Please keep your packaging and box.
Keep the original box for future shipments.