3form SimpleSpec 200.48-Seeyond Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу для Внутрішнє оздоблення приміщень 3form SimpleSpec 200.48-Seeyond. 3form SimpleSpec 200.48-Seeyond 9 сторінок.
Друкувати сторінку
Ready To Go
SimpleSpec 200.48-Seeyond
Installation
3
Attach Bottom Row of Back Tiles to
Baseplate cont...
b
First, using zip ties, connect each of these clusters
together through the holes between the panels. pull
each zip tie snug. There should be 6 zip ties per tile.
When the whole bottom row has been joined together
with zip ties anchor the clusters to the baseplate.
A2-B
A1-B
Using the screws (3-85-015) with the washers
(3-85-016), screw through the inside of the bottom
Seeyond Tiles and into the melamine baseplate until
snug. Be careful not to over tighten as this will strip
out the melamine and provide a poor anchor point.
This will be the anchor point between the melamine
base and the structure. There should be 4 anchors per
tile.
For more information, please visit 3-form.com or call 800.726.0126
April 2018 | MAN-rTG-200-48 | rEV 002 © 2018 3form, inc. All rights reserved.
D2-B
C2-B
B2-B
D1-B
C1-B
B1-B
tm
Installation Manual
4
Connect Clusters Together
a
A4-B
A3-B
A2-B
A1-B
B4-B
C4-B
D4-B
D3-B
B3-B
C3-B
D2-B
C2-B
B2-B
D1-B
C1-B
B1-B
6