abco SureVAC 207422 Оригінальна інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Пилосос abco SureVAC 207422. abco SureVAC 207422 9 сторінок.

Troubleshooting

Resetting Circuit Breaker:

1. Disconnect unit from the electrical supply.

2. Remove any object that may have stalled the brush roll.

3. Rotate the brush roll by hand to make sure it is not frozen in position.

4. Push reset button downward until it snaps into its original position.

5. Reconnect the Powerhead to the electrical supply of the electrified hose handle.

Problem

Motor is not working

Brush not run

Power nozzle not

picking up well.

Possible cause

1. Electrical connection at hose

coupling not made.

2. Power nozzle cord not firmly

plugged into the receptacle on

the hose handle.

3. Circuit breaker tripped.

1. Broken or worn belt.

2. The brush roller is blocked.

3. Bearing worn out.

1. Clogged air chamber.

2. Clogged wand or hose.

3. Brush is worn out.

Possible solution

Check the connection between the

electrified hose and the power unit.

Plug cord firmly in

Disconnect power, remove any object

that may have blocked the brush

roller, and reset the breaker.

Replace belt

Disconnect power, remove any object

that may have blocked the brush

roller.

Replace the brush and bearing

assmbly by distributor.

Disconnect power, remove the

obstruction.

Disconnect power, remove the

obstruction.

Replace the brush.