Altronics Micron T 2163 Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Електроінструмент Altronics Micron T 2163. Altronics Micron T 2163 4 сторінки. Soldering iron and accessories kit

Друкувати сторінку

Remember to tin all new tips before use. For tip first time use, the tip should be tinned immediately after

switching on and warm up of the tip. The optimum temperature for tip tinning is 250°C (482°F).

1. Always keep tips tinned before returning to the holder, switching off or storing for any period of time.

Wipe only before using.

2. Don't keep iron set at a high temperature for long periods of time as this will break down the surfaces

of the tip.

3. Don't put any excessive pressure on a tip or rub a tip on a joint. It does not improve the heat transfer

but only damages the tip.

4. Never clean the tip with abrasive materials or a file.

5. Don't use a flux containing chloride or acid. Use only rosin or activated resin fluxes.

6. If any oxide does form, it can be cleaned by lightly rubbing with a 600-800 grit emery cloth, or cleaning

with isopropyl alcohol or equivalent. After cleaning, wet the tip and wrap rosin-core solder completely

around the newly exposed surfaces.

T 2163 SPECIFICATIONS:

Input:220-240Va.c. 50Hz Class I

Output: 30W

Temperature range:.400°C to 420°C (752°F to 788°F)

Heater: Mica (Natural) [Minimal smoking 1

Length: 230mm

Weight: 150g

T 2163 KIT ACCESSORIES CONTENTS:

-Soldering iron and stand / holder

-Desoldering vacuum pump / sucker (T1242)

-Precision screwdriver (+/-) Φ2.5x75mm

-Screwdriver (+/-) Φ3x75mm

-Screwdriver (+/-) Φ5x75mm

-Screwdriver (+/-) Φ6x125mm

-Long nose plier 5"

-Diagonal cutting plier 4.5"

NOT FIELD SERVICEABLE.

Distributed By: Altronic Distributors Pty Ltd. Perth W.A. 6000,

Phone: 1300 780 999 Fax: 1300 790 999

Internet: www.altronics.com.au

Micron T 2163 Soldering Iron and Accessories Kit

usage]

-IC Extractor

-Wire stripper & cutter

-Multimeter

-8 piece allen key set

-Solder (2m length)

-8 Way Component storage box

-Tweezers (Long nose)

- Spare Tips available (T 2446-8)

4 |

P a g e