artisan WM217 Інструкція з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Швейна машина artisan WM217. artisan WM217 12 сторінок. Medium-weight materials utility-decorative
Setting the stitch widh
28
15
27
1
Lever 14 for full adjustment of stitch width.
Stops 15 with knurled nuts 27 limit the stitch
width . the stops can be by-passed by lifting the
lever 14 (Fig 1).
The lever 14 may only be moved during sewing.
When the machine is at a stand-still, the needle
must be out of the fabric.
setting the needle position
13
15
27
14
2
The lever 13 for the stitch position can be set
from left right in seven positions. It too may be
moved during sewing but again when the
machine is at a standstill ,the needle must be
out of the fabric (Fig. 2).
The stitch is limited to 8 mm on one side when
the needle position is left or right .
Setting the stitch length
The stitch length is set forwards and reverse by
turning the knob(19a)(Fig, 3).
Fine setting for satin stitch:
Press lever 19 downwards. Slide stop 21 to
left
Fine setting with knob 20
If the stop 21 is pushed right again, the machine
8
setting the stitch length
19a
19
3
21
20