artisan ARTPC-SB2M Інструкція з монтажу Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Аксесуари для гриля artisan ARTPC-SB2M. artisan ARTPC-SB2M 8 сторінок. Dual side burner mounting bracket for artisan cart models: artpc-26, 32 and 36

Друкувати сторінку

ASSEMBLY PROCEDURE:

STEP 1:

To begin installing the ARTPC-

SB2M Mounting Bracket in your

Artisan cart, you must first re-

move the appropriate existing

shelf unit out of it.

This is accomplished by remov-

ing the 4 screws and lock wash-

ers located under the shelf on

both the sides of it.

(See Figure # 1)

NOTE 1: The ARTPC-32 shown

in this drawing is for illustration

purposes only. These same in-

structions apply to all Artisan

cart models.

NOTE 2: The ARTPC-SB2M Bracket can be mounted to the left or right side of the cart. For illustration purposes,

the assembly will be shown on the right side of the cart

STEP 2:

Install the ARTPC-SB2M Main

Bracket assembly (item 10 -

part 510-1243 shown on page

2) by using the proper screws

provided.

IMPORTANT:

Install the 1/4-20 FLAT head

screws on the TOP and the 1/4-

20 TRUSS head screws at the

BOTTOM.

Tighten screws while aligning

the mounting bracket to the

sides and top edges of the cart

unit's side panel.

(See Figure # 2)

Install one of the provided grommets to protect the gas line to be installed at a later stage.

1/4-20 FLAT HEAD

SCREWS

BACK

BRACKET

1/4-20 TRUSS HEAD

SCREWS

EXISTING SHELF

SCREWS

AND

WASHERS

Figure # 1

GROMMET

Figure # 2