Alvarado Supervisor 500 Інструкція з монтажу Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Турнікети Alvarado Supervisor 500. Alvarado Supervisor 500 19 сторінок. Barrier-free optical counting turnstile
Друкувати сторінку
Installation Tools
•
Tape Measure
•
Shop Vac
•
Chalk Line
•
Rubber Mallet
•
Pencil
•
Torque Wrench (ft-lbs.)
•
Hammer Drill
•
Open Wrench
•
1" Concrete Drill Bit
•
15/16" Socket
Uncrating
The SU500 has been packed for shipping to prevent damage to the unit. Two or more installers are required
to unload the SU500 at the installation site. Once the turnstile cabinets have been placed in the installation
location, carefully remove the protective packing material from the sides of the cabinets.
Parts List
This product is shipped with all installation hardware and components. If installing a single lane, refer to the Single Lane Parts List
below. For additional lanes, refer to the Center Cabinet Parts List. Make sure that none of these parts are missing and/or damaged
before beginning installation. If parts are missing and/or damaged, please contact Alvarado.
Single Lane Parts List
Slave Cabinet
(Qty 1)
Master Cabinet
(Qty 1)
Concrete Anchor Package:
•
5/8" Concrete Anchors (Qty 4)
•
5/8" Anchor Bolts (Qty 4)
•
5/8" Flat Washers (Qty 4)
Cabling:
•
11' Crossover Cable (Qty 1)
Page 4
For Assistance: [email protected] +1 (909) 591-8431
SU500 Installation Instructions
•
Level
•
#2 Phillips Head Screwdriver
•
Precision Flat Head Screwdriver
•
Clear RTV Silicone
Center Cabinet Parts List (Per Center Cabinet)
Center Cabinets are used to create additional lanes for multi-lane
configurations. Each additional lane includes the parts below.
Center Cabinet
(Qty 1)
Concrete Anchor Package:
•
5/8" Concrete Anchors (Qty 2)
•
5/8" Anchor Bolts (Qty 2)
•
5/8" Flat Washers (Qty 2)
Cabling:
•
11' Crossover Cable (Qty 1)
PUD1456R5-0
SU500 Installation Instructions
Introduction
The SU500 may be used as a standalone counting device, or in conjuction with Alvarado's GateWatch software or GWCB-12
counting box.
This manual covers the physical installation process for the SU500 Barrier-Free Optical Counting Turnstile. Instructions for basic
operations are provided. For detailed operational instructions, refer to the appropriate software / hardware documentation with
which the SU500 will be integrated:
•
GateWatch User's Manual
•
GWCB-12 Installation & Maintenance Instructions
SU500 Cabinets
There are three types of SU500 cabinets used to create passage lanes: a master cabinet, a slave cabinet, and a center (expansion)
cabinet. A single passage lane consists of a master cabinet and a slave cabinet [Figure 1]. The center cabinet is used to create
additional passage lanes with the addition of a single cabinet [Figure 2].
The master cabinet is always installed on the right-hand side when viewed from the entry side.
Master Cabinet
The master cabinet contains the main turnstile
controller, power supply, sensor receiver array, and a
power button located at the base on the secured side.
If the optional count relays are installed, they are
located below the main turnstile controller.
If optional battery-powered counters are installed, the
counter for the entry direction is mounted to the side
panel.
Slave Cabinet
The slave cabinet contains the sensor transmitter
array.
If the optional battery-powered counters are installed,
the counter for the exit direction is mounted to the side
panel.
Center Cabinet (Multi-Lane Configuration)
Center cabinets contain both master and slave
components. Center cabinets are extension cabinets
used in multi-lane applications.
The center cabinet contains the main turnstile
controller, power supply, sensor arrays for both the
master and slave side of the center cabinet, and a
power button located at the base on the secured side.
If the optional count relays are installed, they are
located below the main turnstile controller.
If the optional battery-powered counters are installed,
the counters for the entry and exit directions are
mounted to the side panels (see page 31).
PUD1R5-0
For Assistance: [email protected] +1 (909) 591-8431
Figure 1
Single-Lane Configuration
Exit Side
Power
Button
Slave
Master
Cabinet
Cabinet
Entry Side
Figure 2
Multi-Lane Configuration
Exit Side
Power
Power
Button
Button
Slave
Center
Master
Cabinet
Cabinet
Cabinet
Entry Side
Page 5