DLS Effects EchoTAP Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Музичне обладнання DLS Effects EchoTAP. DLS Effects EchoTAP 2 сторінки. Tape echo simulator & 2 channel delay
Друкувати сторінкуEchoTAP
Tape Echo simulator & 2 Channel Delay
Input A
Echo
Repeats
Features:
Echo-1 Delay Time: 16 positions of most popular fixed delay settings from 50ms to 3 seconds.
Echo-1 Volume: Volume of echoes while using Echo1.
Tap Tempo: User settable tap tempo delay time from 30ms to 3 seconds. (Tap switch adjustable)
Tap Volume: Volume of echoes while using Tap Tempo.
Echo Repeats: Adjusts the number of echo repeats (counter clockwise is least repeats, clockwise is most
repeats)
Echo Tone: Tone adjustment for the echoes only. (counter clockwise the tone is the brightest, clockwise the
tone is cut (low tone). With tone near cut, you achieve the old Tape Echo Machine sound and decay.
Echo-1/Tap Tempo: Footswitch switches between Echo1 fixed delay setting, or Tap Tempo delay mode.
On/Off: Footswitch between effect On (echoes) or effect Off (true bypass).
Hookup Configurations: (Mono In: Mono Out), (Mono In: Stereo Out), (Stereo In: Stereo Out)
Input A: Instrument input.
nd
Input B (Stereo): 2
B channel is separate from the Input A channel. The stereo image is generated from Input A and mixed with
the isolated Input B.)
Output A: Output (mono) (see hookup page)
Output B: Output (OUTB output is slightly brighter than OUTA) (mono or stereo) (see hookup page)
TM
Input B
OUT B
Stereo
Cut
Tone
Delay Time
300
Normal
280
Tone
Echo
250
Tone
225
ms
200
150
100
DLS
Effects
-Stereo-
On/Off
input for Stereo I/O (When Input B is used, it is routed to OUTB. In this case the input
User Manual
OUT A
Echo-1
350
400
500
Echo-1
750
Volume
1.5
s
2s
2.5s
3s
50ms
Echo-1 / Tap Echo
By DLS
Effects
+9vdc
Tap Echo
Volume
TM