Alvin DPX42 Інструкція з експлуатації та технічного обслуговування
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Офісне обладнання Alvin DPX42. Alvin DPX42 2 сторінки. Deluxe drawing board
Друкувати сторінкуNote:
Deluxe Drawing Board incorporates an Alvin
Care and Handling
Avoid over tightening brake screws or damage may occur.
Clean board surface and underside of blade with mild detergent and soft cloth. Wipe dry.
When transporting or storing the DPX, lock the straightedge at the bottom edge of the board to minimize the chance of damage.
Protect your DPX from damage by storing and transporting in a protective case.
Do not attempt to move straightedge with brakes tightened.
Avoid direct exposure to sunlight and extreme heat.
To Adjust and Lock
Parallel Straightedge Position
Be sure all three brake knobs are free and loose.
1
Grasp one end of straightedge and hold firmly against
2
drawing board.
Gently pivot other end of straightedge up or down until
3
desired parallel position is reached.
Secure wire under thumbscrew brake (B) in upper right
4
corner to maintain parallel positioning.
With straightedge in desired position, gently tighten both
5
left and right thumbscrew brakes (A).
Do not overtighten. Overtightening brake
CAUTION
screws will damage wires.
To Maintain Straightedge
Due to the Laminar construction of this straightedge, it is
possible to have the center bowed if the straightedge is
subjected to any sizeable force acting in the vertical direction.
To correct, lift ends A or B while holding down the center
of the straightedge just enough to offset the bow.
DPX Series Deluxe Drawing Board
Operation and Maintenance Instructions
1101 series Parallel Straightedge and VYCO board cover.
®
(Diagram A)
(Diagram B)
A
Diagram A
End
A
Diagram B
For models
DPX36 and DPX42
B
A
Force
End
B