3M X95 - Digital Projector XGA LCD Посібник з безпеки продукції - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з безпеки продукції для Проектор 3M X95 - Digital Projector XGA LCD. 3M X95 - Digital Projector XGA LCD 18 сторінок. 3m digital projector x95
Також для 3M X95 - Digital Projector XGA LCD: Швидке налаштування (1 сторінок)
Друкувати сторінку
Lamp Operation:
The following symptoms may indicate a lamp in need of replacement:
• LAMP indicator lights up red.
•
To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
-
-
The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
-
For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at
www.lamprecycle.org
In Canada, contact 1-800-364-3577 (3M Canada)
Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1. While the projector is running, press the MENU button on the remote control.
Choose the "OPTION" using the
Choose the "LAMP TIME" using the
2. The operating time of the lamp will be displayed.
The lamp time is the time counted after the last resetting.
Please reset the lamp time only when you have replaced the lamp, for a suitable
indication about the lamp.
Reset Lamp Hours
(1) Press the MENU button to display a menu. Only when the EASY MENU has appeared,
please perform the next step (2).
appear.
time.
10
Lamp
WARNING
button, and press the
Note
3M™ Digital Projector X95 Product Safety Guide
button or the ENTER button.
button.
© 3M 2007