Akril Cooktop Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Варильна поверхня Akril Cooktop. Akril Cooktop 6 сторінок. Splashback

What adhesive do I use?
AKRIL ADHESIVE SYSTEM
Akril recommend using the Bostik V60 neutral cure
silicone. Only neutral cure silicones should be used, this
will ensure there is no bleed through the painted finish.
When used in wet areas they must be used according to
instructions as detailed (see from page 25 onwards).
Double-sided tape
6mm adheasive bead 10mm appart
across the width of cooktop
=
Silicon Join
GENERAL SILICON SYSTEM
Silicon jointing systems are acceptable for use in both wet
and dry areas. In all instances standard glazing industry
silicon jointing practices must be followed. Use only neutral
cure silicon when joining Akril.
• Internal Corner
• External Corner
• Edge Cap (Supplied by Aluminum Supplier)
• Butt Join
• Internal Mitred Corner
• External Standoff
• Internal Standoff
• External Mitered
• External Butt
` l l h q lm
COOKTOP
=
` l l h q lm
Allow 3mm
Expansion Gap
Apply approx. 6mm vertical adhesive
bead 20mm appart
20mm
Minimum 50mm gap
between the front of
spashback and edge of
cooktop
Use a straight edge to press Akril
Run silicone down the internal corner
300mm