Ashly TM-335 Посібник з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Підсилювач Ashly TM-335. Ashly TM-335 12 сторінок. Public address mixer/amplifier

Operating Manual - TM-335 Public Address Mixer/Amplifier

Speaker Wiring

● Before connecting speakers to the TM-335 unit, be sure to disconnect the AC power cable.

● Make certain that the load impedance is not less than the rated impedance indicated.

● Low Z (4

), 25V, and 70V speaker loads should not be wired in combination with each other.

Ω or 8Ω

● Use class 2 wiring.

For the 4

low impedance terminal, connect as shown below, with the negative (-) speaker wire

Ω

connected to the COM terminal and the positive (+) speaker wire connected to the 4

from the illustration how two 8

For the 8

low impedance terminal, connect as shown below, with the negative (-) speaker wire

Ω

connected to the COM terminal and the positive (+) speaker wire connected to the 8

from the illustration how two 4

in parallel to make an 8

For 25V and 70V terminals, connect with matching transformers as shown below. Note: 230V

export models have 70V and 100V taps instead of 25V and 70V.

speakers can be wired in parallel to make a 4

Ω

speakers can be wired in series, or two 16

Ω

load.

Ω

Note

Ω terminal.

load.

Ω

Note

Ω terminal.

speakers can be wired

Ω