ASI FS-0500 Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Диспенсер ASI FS-0500. ASI FS-0500 6 сторінок.

Друкувати сторінку

AMERICAN SPECIALTIES, INC.

441 Saw Mill River Road, Yonkers, NY 10701

(914) 476.9000 • (914) 476.0688

www.americanspecialties.com

PODIUM MOUNTED AUTOMATIC GEL HAND SANITIZER DISPENSER (HSD) INSTALLATION GUIDE (Pg 4 of 4)

PROBLEM

INDICATOR

Supply quantity

Low volume dispense

diminished

Red light in the sensor flashes

continuously when the user's

hands are within the sensor

range

No supply dispensed

No supply coming

out of the spout

Red light in the sensor does

not flash (once) when user 's

hands are within the sensor

range

Red light flashes (once) and

the motor operates.

Supply dispensing

Steady stream of droplets is

from the spout

dispensing.

continuously

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

CAUSE

Voltage of batteries is low

Voltage of batteries likely below

1.47V per cell

Supply level is below supply tube.

The tank has been filled but supply

has not reached the spout.

The connector between the motor

and the dispenser head is not

properly engaged.

Sensor is picking up reflections

from another object

Connectors between the dispenser

head and the pump assembly and/or

the power supply are disconnected

or not properly connected.

Batteries are completely depleted.

Supply solidification at the supply

tube.

The Com Cable between the pump

assembly and soap dispenser is not

connected properly.

MODEL №:

ISSUED:

REVISED:

SOLUTION

Replace batteries

Refill supply tank

Press the refill button on the pump

until supply starts to come out of the

spout again, or press remote "Fill"

button.

Connect the Com Cable plug and

socket properly so that the white O-

ring is not visible.

Eliminate cause of reflection

Connect the plugs and sockets

correctly.

Replace batteries

Fill the tank with warm water at

120~140°F (49-60°C) and run the

pump constantly until supply is

dispensed

Connect the Com Cable plug and

socket properly so that the white O-

ring is not visible.

0390-HSD

30 SEP 2020

7 OCT 2020