Askoll PURE XL HC LED Gebrauchsanweisung - Seite 12
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Aquarien Askoll PURE XL HC LED herunter. Askoll PURE XL HC LED 14 Seiten. Marine aquarium kit
Auch für Askoll PURE XL HC LED: Gebrauchsanweisung (14 seiten)
Seite drucken
5) Turn the pump volute counterclockwise to remove it, then extract
the impeller (fig. 23).
6) Rinse the impeller under running water (fig. 24).
7) Clean the impeller's seat carefully with a non-abrasive brush
(fig. 25).
8) If necessary, also clean the intake tube, delivery tube and deliv-
ery under running water.
9) Reassemble and restore the pump carefully along with the other
components, proceeding in the reverse order to the disassembly
procedure.
6.4. Cleaning the lighting unit
1) After disconnecting the plug of the lighting unit, remove the filter
cover and the light cover.
2) Place the covers on a surface protected with a cloth so as not
to scratch them.
3) If the light cover or the lighting unit (with the timer) need re-
placing, disassemble the two elements by unscrewing the three
screws which keep them together using a suitable Phillips
screwdriver (fig. 26).
4) Clean the lighting unit with a damp cloth.
5) Reassemble and reposition the components carefully repeating
the above described procedure in opposite order.
24
7. TROUBLESHOOTING
PROBLEM
The lighting
is not
working
Water
temperature
low
No water
flow
Low water
flow
25
EN
CAUSE
Missing connection of
the led driver to the pow-
er outlet
Missing connection of
the lighting unit to the led
driver
Other
The thermal heater is not
plugged into its power
outlet
The thermal heater ad-
justment knob is set too
low
The ambient temperature
is too low
Other
The pump is not plugged
into its power outlet
The pump is jammed
Other
The intake tube, pump,
delivery tube or delivery
is clogged
26
SOLUTION
Connect the led driver
to the power outlet
Connect the lighting
unit to the led driver
with its connector
Contact your retailer
Plug
the
thermal
heater into its power
outlet
Set the temperature
to the correct value
(par. 5.1.3)
Add a supplementary
thermal heater
Contact your retailer
Plug the pump into its
power outlet
Clean the impeller
(par. 6.3)
Contact your retailer
Clean the parts
(par. 6.3)
13