Ambroise UTX-POST Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Körperpflegeprodukte Ambroise UTX-POST herunter. Ambroise UTX-POST 18 Seiten. Orthosis

•

can open up far enough

DONNING AND DOFFING THE UTX

The UTX-SWING orthosis is put on while sitting. To achieve this, the orthosis must first be

unlocked by hand. Straighten the knee hinge of the orthosis, make a dorsal flexion at the ankle

hinge (bring the foot up) and bend the orthosis.

The orthosis is put on the leg while it's in a 90 degree angle. In some cases, the foot is first

placed on the foot support, so the foot and foot support can be inserted together in the

shoe. In other cases, the foot support is first placed in the shoe. The strap below the knee is

fastened first. The order to fasten the remaining three straps is up to your liking.

The UTX-ESF / STABIL orthosis is also put on while seated. To do so, the orthosis must first

be unlocked by hand. Straighten the knee hinge of the orthosis, push the button at the top of

the orthosis and bend the orthosis.

On our YouTube channel you can find a tutorial how the UTX can be donned and doffed.

www.youtbube.com/AmbroiseHolland

It will require practice to become skillful in donning and doffing the orthosis. See the following

instructional photo series:

- when brace is on the leg.

1. Hold the clip between thumb and index finger and bring it

towards the connector. Beware of any skin entrapment.

3. Close the clip with your thumb. Beware of skin entrapment.

UTX.2018.01

User information | +31 (0)53 4302 836 | [email protected] | www.ambroise.nl

Figure 2: Photo measurement, casting the leg

2. Connect the clip with the connector with a twisting motion.

Make sure the clip is well connected.

4. When you hear the 'click' it means the clip is closed correctly.

is no longer needed.