Ambrosia 2000 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Ambrosia 2000 herunter. Ambrosia 2000 18 Seiten. Preamplifier second edition

use the MEM button to get back to your last Menu position, the Shaft Encoder to scroll through the options

for bass and treble, and the ENT button to save your desired setting.

●

The next Menu position is FILT (Low Cut Filter) and will only display with the optional phonostage installed.

The options are None, MC, MM or MCMM (applies to both). The phono filters are set at approximately 20 hz.

●

From here, pushing MEM and then the down SEL button will take you to LOFT (Low Frequency Turnover).

There are four options possible. Be advised that these numbers only indicate the relative area of frequency

turnover points. The same holds true for the next position, HIFT (High Frequency Turnover). There are four

options available. For LOFT and HIFT, use your ears to determine which sounds best to you.

●

Next is COPY (Tape Copy) which allows you to copy from one tape recorder to another. The positions are

OFF, T1 >T2 or T2 >T1.

●

The next option is TAPE (Tape Monitor). You can select either OFF, MON 1 or MON 2.

●

The last Menu position is HTGA (Home Theater Bypass Gain). You can select either -14 or +0. Default is -14

for US units.

All of these functions are mirrored in the available remote control and can be adjusted in the same way as above.

Ambrosia 2000 Second Edition Manual V1