Flismaskin 1500 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hackmaschinen/Häcksler Flismaskin 1500 herunter. Flismaskin 1500 20 Seiten. Wood shredder - chipper

Seite drucken

4. Transport

Before moving the machine, stop the engine!

MAINTENANCE AND CHECKS

All technical check-ups and maintenance should be done with the

engine shut off and the spark plug cap removed from the spark

plug.

While cleaning the shredder, never spray the bearings with a high

pressure washer! It could cause water to enter the bearings which

will cause damage to the machine; (this is not covered by warranty).

The two grease nipples on the rotor require lubricating once a year

or every 500 hours.

Before putting the shredder into storage grease or oil the bearings,

blades and rotor to protect against corrosion.

Points to be checked

Cleaning the machine

For engine maintenance refer to the Engine Manufacturers Engine

Manual.

Note that the ﬁrst engine oil change is after 5 hours use.

Manual Shredder - chipper