AMC 27100MKIIse Anweisungen für Installation und Betrieb Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Anweisungen für Installation und Betrieb Handbuch für Verstärken AMC 27100MKIIse herunter. AMC 27100MKIIse 8 Seiten.
Seite drucken
REAR PANEL CONNECTIONS
1. MAINS INLET
Connect the AC line cord in to the mains inlet
and plug the AC cord plug into a nearby wall
outlet that provides the correct AC power line
voltage.
2. INPUT LEVEL CONTROLS
Each channel of the 27100MKIIse has its
own, independent
turning on the 27100MKIIse for the first
time, make sure that all level controls are
set to their fully clockwise position. These
controls can be used for various functions.
For example, they can
match
the
levels
multi-room
installation,
sensitivity of the power amplifier, so that the
volume control on pre-amplifier is at a more
convenient and usable position. They can
also be used to optimise the balance in a
stereo system.
3. LINE OUTPUTS
Each input has an accompanying line output
which will pass the signal onto another
amplifier input or other line-level device.
4. LINE INPUTS
There are five RCA phono connectors on the
back panel that connect to the inputs of each
of the power amplifiers.
5. LOUDSPEAKER TERMINALS
The 27100MKIIse is equipped with binding
post type
speaker
desiged to handle the extremely high peak
currents that this
of
giving.
Connections
terminals to the loudspeakers should be
made with heavy-duty wire. Standard wire
of 16 gauge or thicker is recommended
especially if low impedance loudspeakers
are used.
level
control.
be
used
of loudspeakers in a
or to lower the
terminals
that
amplifier
is
capable
from
FRONT PANEL CONTROLS
1. POWER SWITCH
The press button switch marked power can
be used to switch the 27100MKIIse on or
off. When the 27100MKIIse is switched
on, the small indicator above the power
switch will be lit.
UNDER NO CIRCUMSTANCES SHOULD
THE CASE OF THE AMPLIFIER BE
Before
OPENED BY ANYONE OTHER THAN A
QUALIFIED ENGINEER, AS DANGEROUS
VOLTAGES ARE PRESENT INSIDE. ANY
U N A U T H O R I Z E D
INVALIDATE YOUR WARRANTY.
to
are
these
4
R E P A I R
M A Y