AMC XCDI Anweisungen für Installation und Betrieb Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Anweisungen für Installation und Betrieb Handbuch für CD-Spieler AMC XCDI herunter. AMC XCDI 12 Seiten. Compact disc player
Auch für AMC XCDI: Anweisungen für Installation und Betrieb Handbuch (20 seiten), Anweisungen für Installation und Betrieb Handbuch (16 seiten), Anweisungen für Installation und Betrieb Handbuch (16 seiten), Handbuch (17 seiten)
Seite drucken1. AUDIO OUTPUT
Connect the left and right channel
unbalanced (RCA) audio outputs to any
input on your preamplifier or receiver
except "Phono" or "Turntable". High-
quality interconnection cables are
recommended.
1. POWER SWITCH
Depressing the power switch turns on the
CD player. Depressing again turns the
CD player off.
AMC designs the power switch as
mechanical type for users to set the
power switch always ON and plug power
cord of XCDi to Switched AC Outlet of X7i
Stereo Receiver for making the XCDi &
X7i as a linked Hi-Fi System together.
Users can then turn the System (XCDi +
X7i) On or Off by control the power switch
of X7i only by pushing power switch on
X7i front panel or Power button on RC-S2
System Remote Control handset.
2. OPEN / CLOSE
By pressing the OPEN/CLOSE button the
disc tray will open. Press it again will
close the tray. If the tray is opened while
a disc is playing, the disc will stop and the
tray will open.
An opened tray can also be closed by
pressing PLAY/PAUSE button or by
gently pushing the tray inward.
When the disc tray is open, the window
will display "OPEN"
For CD, when you press OPEN/ CLOSE
button to close disc tray, the window will
display "-- --" for around one second then
display numbers of tracks (show "##"
under "TRK")
2. OPTICAL DIGITAL OUTPUT
Connect the Optical digital output to
optical digital input of amplifier or
receiver.
3. AC RECEPTACLE
The AC RECEPTACLE is for you to plug
in with power cord attached in the
packing.
inside the disc and total time on the disc
("##: ##" = "Minutes": "Sec")
3. PLAY/PAUSE
Place CD disc into the opened tray with
the label facing up. Press the PLAY/
PAUSE button or OPEN/CLOSE button
will both close the tray and pass through
the procedure described on above item
"2.OPEN/CLOSE". When all data are
loaded, you can press PLAY/PAUSE
button and begin playback. Or you can
use Track Up/ Down buttons (5) to select
the TRACK then press PLAY/PAUSE
button and begin playback.
Playback will stop when STOP button is
pressed or when the disc has reached the
end. While the disc is playing, press the
PLAY/PAUSE button to suspend playback
(PAUSE). Press the PLAY/PAUSE button
again to resume playback.
4. STOP
To stop the CD while playing, press the
STOP button. Pressing the STOP button
will cancel any repeat play cycles and the
display will show the numbers of the
tracks and total time on the disc.
5