FLO-DYNAMICS C-VAC3 Handbuch - Seite 14

Blättern Sie online oder laden Sie pdf Handbuch für Serviceausrüstung FLO-DYNAMICS C-VAC3 herunter. FLO-DYNAMICS C-VAC3 20 Seiten.
Auch für FLO-DYNAMICS C-VAC3: Handbuch (20 seiten)

Seite drucken

4. Turn top dial to "Remove Fluid" position.

5. Turn bottom dial to "Drain Waste" position.

6. Open ball valve on black service line.

7. Turn on vacuum switch.

8. Wait until no more waste fluid is being removed.

9. Turn machine off and replace component.

10. Turn top dial to desired fluid type to fill the radiator.

11. Turn vacuum switch off.

12. Wait until there is no longer vacuum in the radiator & remove cone adapter.

13. Top off radiator if needed.

14. Top off overflow bottle if needed & replace radiator cap. (see top-off procedure)

NOTE: Whether you are servicing a vehicle with a traditional radiator cap or one with only an

overflow bottle, the rubber cone adapter must be immersed in the coolant slightly for the machine

to remove coolant from the vehicle. In order to do this, coolant may need to be added to the

radiator or overflow bottle.

TOP OFF PROCEDURE:

1. Connect wand adapter to red service line.

2. Make sure ball valve is closed.

3. Turn bottom dial to desired fluid type.

4. Turn pump switch on.

5. Open ball valve at the end of the red service line to regulate fluid flow.

6. Turn pump switch off when finished.

SUCTION WAND PROCEDURE:

1. Connect wand adapter to black service line & open ball valve.

2. Turn top dial to "Remove Fluid" position.

3. Turn vacuum switch on.

4. Turn switch off when finished.