Flock Audio PATCH LT Benutzerhandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte Flock Audio PATCH LT herunter. Flock Audio PATCH LT 20 Seiten. Setting up your patch model for the first time
Auch für Flock Audio PATCH LT: Verbinden Sie (7 seiten), Diagramm zur Schnelleinrichtung (2 seiten)
Seite drucken
INSTALLING NEW FIRMWARE
In order to properly install new available Firmware onto the Flock Audio PATCH LT System Hardware, you will require access to the top side
of the hardware unit. Located on the top lid on the right hand facing side there are 2 small holes in the chassis lid. These holes provide
access to the Bootload and Reset Buttons.
user serviceable parts inside the PATCH LT system and opening the lid will result in voiding any active manufacturers warranty.
Perform the following steps to successfully update your system's Firmware.
Step #1.
Download the latest available Firmware from the Downloads page at www.flockaudio.com
Step
#2. Gently pull the PATCH LT System slightly out of the rack case to gain access to the top right side of the hardware.
Step #3.
Using 2 paperclips or similar size tools, insert one through the first hole "Bootload" and while pressing & holding the button down,
use the other paperclip or similar size tool to quickly press & release the "Reset" button to initiate the system into Bootload Mode, making it
ready for new Firmware installation.
hole "Bootload" and while pressing & holding the button down, quickly toggle the system off for 3 seconds using the front power switch and toggle it
back on while holding and then releasing the Bootload button
Step #4.
Follow the remaining process and prompts on the Firmware Installer Application on your computer to complete the Firmware
Installation. Once complete, restart your PATCH LT System and the PATCH APP to complete the installation process.
issues installing the new firmware, please repeat the process starting with Step #3 and if the problem persists please contact Flock Audio Support.
PATCH
MANUAL
lt
How-to Install new PATCH LT Firmware
N O T E :
T H I S P R O C E S S D O E S N O T R E F L E C T
SOFTWARE UPDATES. FIRMWARE UPDATES ARE
EXPECTED TO BE RARE AND NOT REQUIRED OFTEN.
Step by Step Installation Process for New Firmware
REMINDER:
NEVER OPEN THE LID to avoid electric shock causing injury or death. There are no
Note: You can also perform the same process by using a single paperclip or similar size tool to insert through first
.
16
Reset
Bootload
Note: If there are any
INSTALLING NEW FIRMWARE