Floe VSD 6000 Montageanleitung Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Zelt Floe VSD 6000 herunter. Floe VSD 6000 12 Seiten. Full length pontoon & tri-toon bunks large lifts
Auch für Floe VSD 6000: Bedienungsanleitung für die Montage (12 seiten), Montageanleitung Handbuch (8 seiten), Montageanleitung Handbuch (16 seiten)

ST EP 6

Remove the cable holder and insert the front

cable into groove on the sheave. Re-attach

the cable holder and sheave to clamp. Wrap

the cable around sheave and attach to the

clamp with a 1/ 2" x 2" bolt and nylock nut.

See Fig. 6A. Torque to 60 ft/ lbs.

Attach the other end of the cable by lifting

the opposite side of the front cradle and

fastening with a 1/ 2" x 2" bolt and nylock

nut as shown in Fig. 6B. Torque to 60

ft/ lbs.

Fasten the side cables to the lower frame

clamps using 1/ 2" x 5" bolts and nylock nuts

as shown in Fig. 6C. Check front corner

posts for square and torque to 100 ft/ lbs.

The ball screw side cable is attached to the

upper clamp using a 1/ 2" x 2" bolt and

nylock nut. See Fig. 6D. The other side

cable is attached to the upper clamp using

a 1/ 2" x 2" bolt and nylock nut as shown in

Fig. 6E. Torque both bolts to 60 ft/ lbs.

Cable

1/ 2 x 2" bolt

holder

Fig. 6A

Fig. 6D

1/ 2 x 5" bolt, nut

and flat washers

1/ 2 x 2" bolt

Fig. 6B

Fig. 6A

Fig. 6C

SHEET 10 OF 12

Fig. 6E

See Fig. 6C

1/ 2 x 2" bolt

Fig. 6D

1/ 2 x 2" bolt

Fig. 6B

Fig. 6E