Amcrest IP8M-2496EW Schnellstart-Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Sicherheitskamera Amcrest IP8M-2496EW herunter. Amcrest IP8M-2496EW 16 Seiten.

SETTING UP YOUR CAMERA

ETHERNET WIFI

SETUP

To ensure the security of your camera, you will be

asked to change the password for your camera's default

username (admin). Please select a password that is at

least 8 characters long and one that uses a combination

of uppercase letters, lowercase letters, and numbers.

Note that once the password is changed here it will

take effect immediately. If you forget your password,

you can always hard reset the camera using the steps

detailed in the Troubleshooting section of this guide.

Your camera is now ready to go! Unplug the camera

from Ethernet and power, then relocate the camera to

anywhere within range of the WiFi network that you

connected the camera to. Plug in the camera, then wait

1-2 minutes before tapping the "Start Live Preview"

button.

For additional assistance, please contact us at

www.amcrest.com or give us a call at 1-888-212-7538.

Step-by-step video tutorials available at

www.amcrest.com/videos

SETTING UP YOUR CAMERA

AUDIO SYNC WIFI SETUP

NOTE: This setup method is currently available for Amcrest IP3M-941 and IP3M-HX2 model

cameras. Please use either WiFi Configuration Setup or Ethernet WiFi Setup if you have another

camera model. Plug in your camera and follow the steps below to get your camera up and

running. Please wait 30 seconds after plugging in the camera to allow it to initialize.

Download and open the Amcrest View Pro app

from the App Store or Play Store.

From the home screen, tap the icon in the

top right corner to open the Device List.

Tap the "Add Device" button.