AME 67601 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug AME 67601 herunter. AME 67601 2 Seiten. Break-a-way torque wrench

Seite drucken
Using a 22 MM wrench, adjust
Using a 22 MM wrench, adjust
the torque measurement to the
Using a 22 MM wrench, adjust
the torque measurement to the
Using a 22 MM wrench, adjust
the torque measurement to the
desired torque.
desired torque.
the torque measurement to the
desired torque.
desired torque.
Models 67601
& 67751
Break-A-Way
Torque Wrench
22mm wrench
22mm wrench
Instructions
22mm wrench
22mm wrench
Do not use this wrench as a
※
Do not use this wrench as a
Do not use this wrench as a
※
※
Do not use this wrench as a
hammer or pry bar.
※
hammer or pry bar.
hammer or pry bar.
hammer or pry bar.
Release the adapter by pushing
Release the adapter by pushing
Release the adapter by pushing
Release the adapter by pushing
or pulling from center of the head.
or pulling from center of the head.
or pulling from center of the head.
or pulling from center of the head.
Torque wrench mechanism will break-a-way when desired
Torque wrench mechanism will break-a-way when desired
torque is met. Do not continue to apply pressure after desired
Torque wrench mechanism will break-a-way when desired
torque is met. Do not continue to apply pressure after desired
torque is met.
torque is met. Do not continue to apply pressure after desired
Torque wrench mechanism will break-a-way when desired
torque is met.
torque is met.
torque is met. Do not continue to apply pressure after desired
AME INTERNATIONAL
torque is met.
150-600 Ft.Lbs / 200-750 Ft.Lbs
To avoid inaccurate torque,
150-600 Ft.Lbs / 200-750 Ft.Lbs
To avoid inaccurate torque,
do not fully remove the nut.
To avoid inaccurate torque,
do not fully remove the nut.
do not fully remove the nut.
Using a 22 MM wrench, adjust
Using a 22 MM wrench, adjust
the torque measurement to the
the torque measurement to the
desired torque.
desired torque.
22mm wrench
22mm wrench
Do not use this wrench as a
Do not use this wrench as a
※
※
hammer or pry bar.
hammer or pry bar.
Release the adapter by pushing
Release the adapter by pushing
or pulling from center of the head.
or pulling from center of the head.
Torque wrench mechanism will break-a-way when desired
Torque wrench mechanism will break-a-way when desired
torque is met. Do not continue to apply pressure after desired
torque is met. Do not continue to apply pressure after desired
torque is met.
torque is met.
- 2 -
WWW.AMEINTL.NET
150-600 Ft.Lbs / 200-750 Ft.Lbs
To avoid inaccurate torque,
do not fully remove the nut.
To avoid inaccurate torque,
To avoid inaccurate torque,
do not fully remove the nut.
do not fully remove the nut.
To torque, grasp the handle and push downward.
To torque, grasp the handle and push downward.
To torque, grasp the handle and push downward.
To torque, grasp the handle and push downward.
A break-a-way indicates that the desired pre-set
To torque, grasp the handle and push downward.
A break-a-way indicates that the desired pre-set
A break-a-way indicates that the desired pre-set
A break-a-way indicates that the desired pre-set
A break-a-way indicates that the desired pre-set
torque has been met.
torque has been met.
torque has been met.
torque has been met.
torque has been met.
Lubricate three points
Lubricate three points
Lubricate three points
Lubricate three points
frequently.
Lubricate three points
frequently.
To avoid inaccurate torque or damage to
※
the tool, do not install unnecessary
extensions.
To avoid inaccurate torque or damage to
※
To avoid inaccurate torque or damage to
※
To avoid inaccurate torque or damage to
the tool, do not install unnecessary
※
the tool, do not install unnecessary
To avoid inaccurate torque or damage to
the tool, do not install unnecessary
※
extensions.
extensions.
the tool, do not install unnecessary
extensions.
extensions.
AME INTERNATIONAL
The handle should align with
The handle should align with
the desired torque.
The handle should align with
the desired torque.
The handle should align with
the desired torque.
the desired torque.
The handle should align with
The handle should align with
the desired torque.
the desired torque.
230ft.lb
230ft.lb
230ft.lb
230ft.lb
To torque, grasp the handle and push downward.
A break-a-way indicates that the desired pre-set
torque has been met.
Lubricate three points
frequently.
frequently.
frequently.
frequently.
To avoid inaccurate torque or damage to
※
the tool, do not install unnecessary
extensions.
- 3 -
230ft.lb
230ft.lb
WWW.AMEINTL.NET