CO/Tech 36-7974 Einrichtung
Blättern Sie online oder laden Sie pdf Einrichtung für Beleuchtungsanlagen CO/Tech 36-7974 herunter. CO/Tech 36-7974 4 Seiten. Extendable rgbw led strip light
Seite drucken
Extendable RGBW LED Strip Light
Art.no 36-7974
Model LS9A123-1-01
36-7975
LS9A123-2-01
Read the entire instruction manual before use and save it for future reference.
We apologise for any text and picture errors and any changes of technical data.
If you have any questions concerning technical problems please contact our
Customer Services.
Safety
Warning:
• Neither the product nor its mains adapter may be dismantled or modified in
any way.
• Never use the product or the mains adapter if it is in any way damaged or
malfunctioning. Unplug the product immediately if it is damaged.
• Do not use the product in environments where explosive or flammable gases
are stored or used.
• The product must only be connected to the included mains adapter.
• Never connect several or other types of devices to the mains adapter.
• The product must not be installed on a wet or electrically conductive surface.
• Make sure that the cables are not damaged whilst the product is being installed.
• Always unplug the mains adapter from the wall socket when the product is
not in use.
• Do not carry the product using the mains lead and do not use it for other
unsuitable purposes.
• Never let children play with the product.
• The product may be used by persons with reduced physical, sensory or
mental capabilities or persons with a lack of experience or knowledge which
could jeopardise their safety, provided they have been instructed in the safe
operation of the product and understand the hazards involved.
Important
• The LEDs cannot be replaced. When the LEDs have reached the end of their
service life, the entire product must be discarded.
• This product is intended only for private use.
Risk of eye damage. Do not look directly at the light source.
The product is not suitable for illuminating a room.
The product is intended for indoor use only.
Class II mains adapter.
Class III strip light
UNITED KINGDOM www.clasohlson.co.uk
Installation
Information
The LED strip light can be mounted using the double-sided adhesive tape (mounted).
For best adhesion, ensure that the surface is clean, dry and free of grease.
The length of the light strip can be adjusted by cutting it at one of the soldering
points which are spaced every 33 cm along its length.
Note: Once the strip light has been cut and shortened, it is no longer possible to
extend it with additional strip lights.
1. Strip light: Remove the protective film from the tape on the back of the light
strip and attach it to a clean, grease-free surface. The strip light may also be
screwed on with plastic clips.
2. Connectors. Connect the strip light and the control box together.
Note: Make sure the strip light is connected in the right way, with the arrows
pointing towards each other. Otherwise the strip light will not work.
3. IR Receiver.
Note: Make sure there are no obstacles between the IR receiver on the LED
control unit and the remote control.
4. Control unit
5. Connection cable: Connect the connection cable to the LED control unit.
6. Mains adapter: Plug the mains adapter into an electrical outlet.
LED strip light extension set
Art. no: 36-7975 (sold separately)
1. Unplug the adapter from the electrical outlet.
2. Remove the protective film
from the tape on the back
of the strip light and attach
the strip to a clean, grease-
free surface. The strip light
may also be screwed on with
plastic clips.
3. Connect the strip lights together with one another.
Note: Make sure the strip light is connected in the right way.
Otherwise the strip light will not work.
Remote control
1. 12 colour tones within the RGB spectrum
2. [ R ] Red light
[ G ] Green light
[ B ] Blue light
[ W ] White light
3. [
] Increase light intensity
[
] Decrease light intensity
4. [ OFF ] Turn the strip light off
[ ON ] Turn the strip light on
5. [ FLASH ] Change slowly between all the colours
6. [ STROBE ] Change quickly between all the colours
7. [ FADE ] Change between all the colours, the colours fade into one another
8. [ SMOOTH ] Change between all colours with no visible transition
3
4
2
5
1
6
7
8
Care and maintenance
• Unplug the mains lead from the wall
socket before cleaning.
• The product should be cleaned using
a dry cloth or vacuum cleaner.
Responsible disposal
This symbol indicates that
the product should not be
disposed of with general
household waste. This applies
throughout the entire EU. In
order to prevent any harm
to the environment or health
hazards caused by incorrect waste
disposal, the product must be handed
in for recycling so that the material
can be disposed of in a responsible
manner. When recycling your product,
take it to your local collection facility or
contact the place of purchase. They will
ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Mains adapter
Power supply
230 V AC, 50/60 Hz
Output
24 V DC, 1 A, 24 W
Strip light
36-7974
Dimensions
6000 x 10 mm
Light source
324 x LED
36-7975
Dimensions
3000 x 10 mm
Light source
162 x LED
Remote control
Range
Max 7 m from straight
ahead, 3 m from the sides.
Battery
1 x CR2025 (included)