Coast to Coast WF2AU1B Betriebshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Extender Coast to Coast WF2AU1B herunter. Coast to Coast WF2AU1B 16 Seiten. Long-range, high-performance cellular wifi extender

Seite drucken

INSTALLING THE SIM CARD

Operation: First Time Setup (Cellular Service)

1) Turn the ConnecT 2.0 on.

2) Turn on the WiFi enabled device(s) that you want to connect and scan

for wireless networks. It may take a few minutes for the network

(Winegard2ghzXXXXXX) to appear.

3) The label located on the front of this manual lists the unique default

SSID and password. Select this WiFi signal from the list of wireless

networks and connect. Once the correct SSID has been selected,

enter the password. It is recommended to set your device(s) to

automatically connect with the Winegard ConnecT 2.0.

4) Once connected, open an Internet browser and type 10.11.12.1 into

the address bar and press Enter. This will take you to the Admin

Username: admin Password: admin

See figure 5.

5) Next, you will need to connect to the internet in order to download

the correct cellular provider's firmware. Select WiFi Only and click

the SELECT button.

6) Click the SCAN FOR WIFI button and select one of the usable WiFi

networks.

7) Once connected to the internet, under the NAVIGATE TO PAGE field,

click on the drop-down menu and select CHANGE PROVIDER on the

main status screen. See figure 6.

8) Enter the correct cellular provider in the CELLULAR PROVIDER field

and then enter the correct APN for the SIM card in the CELLULAR

APN field.

9) Click on the CHANGE PROVIDER button.

10) The unit will start to download the necessary firmware. Once the

download is completed, click on the PROCEED button (if available)

to start the flash procedure. Next, click on the 4G/LTE ONLY Internet

Access option on the main Status screen. Your internet status should

change to Connected to "Your Provider". See figure 7.

NOTE:

On the main Status screen, after the first time setup of your cellular

SIM card, you are able to choose from connecting to a useable WiFi connection

or 4G/LET signal. Each time you change the SIM card/cellular provider you will

need to repeat steps 1-10 of the First Time Setup (Cellular Service).

cont.

Figure 5

Figure 6

Figure 7