Coastal WEATHERPAK Setup-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Wetterstation Coastal WEATHERPAK herunter. Coastal WEATHERPAK 2 Seiten. Tactical weather station

Seite drucken

Tactical Weather Station Set-Up Guide

5. Mount the Visibility Sensor to the top tower section, just below the junction box.

6. Place the Rain Gauge on level ground near the tower, but with nothing over the top. Remove the top funnel from the

sensor and verify that the tipping mechanism is able to move freely. Remove anything used to hold the tipping mechanism

in place during shipping.

7. Place the Cloud Height Sensor (Ceilometer) on level ground near the tower.

8. Mount the Power Supply (Battery Box) to the lower tower using the clamps on the rear of the enclosure as shown.

9. Connect all Sensor Cables to the Power Supply (Battery Box) as shown in the Wiring Diagram. Tighten by hand.

820 First Avenue South, Seattle, WA 98134

Tel: +1 (800) 488-8291 / +1 (206) 682-6048

Fax: +1 (206) 682-5658