Coastal Legend 400 Series Einbauanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Einbauanleitung für Armaturen für das Badezimmer Coastal Legend 400 Series herunter. Coastal Legend 400 Series 5 Seiten. Shower enclosure

Seite drucken

STEP 3

Install Door Assembly

Lift Door Assembly (C) onto base and positon it on top of Sill (B) see exploded view on sheet 2. Now slide Door Frame (C) into

Wall Jamb (A) as shown in figure above.

Once Door Assembly is positioned, double check to make sure that door swings out.

Centere and square shower assembly on the base curb.

Leave door assembly standing as is temporarily and do not fasten at this time.

STEP 4

Adjust and Secure Unit

Door Frame Assembly (C) should be pushed up against Wall Jamb (A).

Step inside shower enclosure and push Wall Jamb (D) up against the its respective shower wall as shown. Secure Wall Jamb

(D) with three Installation Screws (E).

Adjust Door Assembly as required within the Wall Jambs and then secure Door Assembly to Wall Jambs (A) and (D) using three

(3) Adjustment Screws (G) per Jamb.

TO ENSURE A LEAK PROOF INSTALLATION:

Run a bead of clear mildew resistant caulking around the outside of shower enclosure where shower unit meets the shower

base and where Wall Jambs meet the wall. Follow caulking manufacturer's instructions before using shower.

figure 3

Detail shows strike on left side / hinge post right side,