Coastal Electronic UFRD 360-2 Lockpick Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für Aufnahmegeräte Coastal Electronic UFRD 360-2 Lockpick herunter. Coastal Electronic UFRD 360-2 Lockpick 15 Seiten.
Seite drucken11. Insert the ribbon cable into the back of the radio in the space just above the factory connector shown in
the photos below. Slide the cable all the way through the radio and out the front.
12. Now locate the second small Lockpick ribbon cable and position it in the front of the radio so it can be
connected to the first cable. Unlock the ribbon cable 2 connector and insert cable 1 into cable 2. Next,
insert the ribbon cable assembly into the open radio connector (same one you removed the screen cable
from earlier) and lock it into place. The proper ribbon cable end is labeled RADIO to help you orient
the cable properly. Insure that the ribbon cable is fully inserted and perfectly straight.
13. Fold the cable and press the assembly fully into the radio with just the single open end of the ribbon
cable labeled screen left extending out the front. Gently pull any extra ribbon cable out the back of the
radio to complete this step.
CORRECT
Contact side
DOWN