Acer AL1711sg Service-Handbuch - Seite 15

Blättern Sie online oder laden Sie pdf Service-Handbuch für Monitor Acer AL1711sg herunter. Acer AL1711sg 46 Seiten.

1. Initialize MCU settings, including I/O, Timer, ISR and Serial Port

settings.

2. Read EEPROM content to recover monitor settings, including brightness,

contrast, color temperature and OSD position .... etc.

3. Initialize system variable, including system flag, OSD timeout counter,

burin mode status... etc.

4. Initialize OSD menu variable for user operation

5. Initialize device on the board, now only MST scaler chip will be

initialized

6. Check if system is in power off status from first AC power up. If yes,

then go to 7, else go to 8.

7. If yes, system will be forced to enter power off status

8. Mode detection

9. Check if input timing has been changed, if yes then go to 10, else go

to 11

10.

Setup MST scaler for display according input timing

11.

OSD handler for OSD operation.

12.

Debug handler, only debug only