Canon 3433B010 Handbuch installieren - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch installieren für Drucker Canon 3433B010 herunter. Canon 3433B010 16 Seiten. Large-format printers
Auch für Canon 3433B010: Grundlegendes Handbuch (40 seiten)

Canon 3433B010 Handbuch installieren

Responding to Messages

Error messages may appear on the display screen of the control panel during printer installation in some cases. If so, it may not indicate a problem with the
printer, and the issue may be easily resolved. Common messages and the causes are listed here with corrective actions. To respond to error messages other
than these, refer to the Basic Guide (2). For other detailed printer instructions, refer to the User Manual installed at "Install the Printer Driver and the User
Manual".
Message
No ink tank loaded.
Check ink tank.
No printhead
Install printhead.
Paper is crooked.
Push the release lever back, then
Pull out the cut sheet.
Could not detect paper size. Push release
lever back,
Pull out the cut sheet.
Insert the maintenance cartridge.
Hardware error.
xxxxxxxx-xxxx
(x represents a letter or number)
ERROR Exxx-xxxx
(x represents a letter or number)
Cause
There is no ink tank of the indicated color in
the printer.
The printhead is not installed.
The loaded paper is crooked.
The paper is loaded in the wrong position or
the paper is curled.
The maintenance cartridge is not installed.
Another kind of error has occurred.
You may have encountered an error that
cannot be resolved.
16
Corrective Action
Load or reload the ink tank.
(see steps 4-11 on page 3)
Install the printhead.
(see steps 1-9 on page 4)
Press the release lever backwards.
1.
Pull out the paper.
2.
Pull the release lever forward.
3.
4. Load or reload the paper.
Install the maintenance cartridge.
Turn off the printer and wait at least three seconds before restoring
the power. If the message still appears, write down the error code and
message, turn off the printer, and contact your Canon dealer for assistance.
Write down the error code and message, turn off the printer, and contact
your Canon dealer for assistance.