Aktakom ATH-2231 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stromversorgung Aktakom ATH-2231 herunter. Aktakom ATH-2231 15 Seiten.

2. Turn CH2 CURRENT KNOB[4] clockwise to maximum current output, and then use CH1 CURRENT

KNOB[19] adjust the desired current output value.(Reference to Section 5.2)

3. Use CH1 VOLTAGE KNOB [18] to adjust the desired voltage output value.

4. Connect the circuit to the CH1 "+"TERMINAL [24] and CH2"-"TERMINAL [28] to get double voltage output.

5. For the bi-polar DC power supply with common ground, connect CH2 "+" TERMINAL [27] to "GND"

GROUNDING TERMINAL [26]. CH1 "+"TERMINAL [24] is the positive output and CH2 "-"TERMINAL [28] is

the negative output.

5.5 SETTING PARALLEL TRACKING MODE

1. Press both TRACKING MODE SLECTION KEY [12, 15] to enable parallel tracking mode .In parallel tracking

mode, CH2 output voltage and current value follows CH1 setting. The output current is double to the CH1

display value.

Illustration of Bi-Polar Tracking Mode

Illustration of Parallel Tracking Mode