Aktakom ATE-2509 Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Thermometer Aktakom ATE-2509 herunter. Aktakom ATE-2509 11 Seiten. Dual laser plus type k thermometer

Seite drucken

4) Press " Mode Button " ( 3-5, Fig. 1) for scrolling more

display function as follows.

Here will show the emissivity data. (The

default emissivity is 0.95.)

Press Mode key ( 3-5, Fig. 1 ) for the

Maximum (MAX), Minimum (MIN), Different

between MAX and MIN (DIF) and Average

(AVG) modes. During the measurement, the

special modes reading will be displayed

beside the mode icon.

Press " Up Button " ( 3-4, Fig. 1) or " Down

Button " ( 3-2, Fig. 1 ) key to change the

High Alarm (HAL) or Lo Alarm (LAL), then

press " Measure Button " ( 3-6, Fig. 1 ) to

confirm it.

For example: When the reading 26.9

LAL 27

will hear a beep sound.

Connect the thermocouple with "

Thermocouple Socket " ( 3-11, Fig. 1 ) and

put the probe in/on the target, the

thermometer will display the temperature

automatically without pressing any button. To

see the minimum or maximum data during

the probe measurement, please hold down

the " Up Button " ( 3-4, Fig. 1 ) or " Down

Button " ( 3-2, Fig. 1).

5) The thermometer will automatically shut off if left idle

for more than 60 seconds.

, the Low icon will flash and you

℃

After measure high temp, the probe

may remain HOT for a while

℃