Coaster 900749 Montageanleitung Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Uhr Coaster 900749 herunter. Coaster 900749 12 Seiten. Grandfather clock

900749

ITEM:

1.Solution for not reporting the time with chime:

a.Rotate the volume button (Figure 2 VOLUME) to the maximum position.

b.Check whether the positive and negative positions of the battery are correct (Figure 1). If it

is inaccurate, please reinstall it according to the icon.

c.If the positive and negative poles of the battery are correct and the problem is still not

resolved, adjust the time to 5:55 clockwise using the minute hand, remove the battery,

wait for a while, and place it again. Then adjust the minute hand to 6:00 to tell the time

and music.

d.Or use the TIME ADJ button on the battery box (Figure 2) to solve problem (c.) above, each

time you press, no more than 8 times, you can hear the time and music. The time signaling

this time is 6:00 AM. Then use the minute hand to adjust the hour hand clockwise to the

actual local time.

2.When there is no music when telling the time, push the sliding button of MELODY SELECT

(Figure 2) to the middle position( ).

3.If there is music without telling the time, push the sliding button of MELODY SELECT (Figure

2) to the middle position( ).

4.The time telling time is inconsistent with the displayed time. It can be adjusted by the TIME

ADJ button (Figure 2) on the battery box. Each time you press it, an hour will be added, and

so on. Note that the TIME ADJ key is after 12 o'clock, and it is 1:00 when you press it again.

5.The hourly timekeeping time is inconsistent with the displayed time. Please set the clock to

5:55 without placing the battery. After placing the battery, manually or automatically go to

6:00, and the clock will show time as 6:00 AM.

6.The time is not reported at 10 o'clock during the day, but reported 10 o'clock at night. The

main reason is that the clock defaults to night as day. You can press the TIME ADJ (Figure 2)

button on the battery box for 12 times to change the time to day or night time.

7.When the product leaves the factory, the hour hand is set at 5:55. When disassembling the

protective tape on the movement, you must be careful to avoid touching the pointer and

each line to prevent the clock hand from shifting and the line loose.

8.The solution for the clock not reporting the time on the hour, explain the cause of the

accident. (Note: Do not manually turn the minute hand clockwise too fast. Turn lightly; do not

turn for less than 15 seconds. Otherwise, at least the above problems will occur.)

 Solution 1：Pull out the second cap manually when you hear the time report, then pull

out the minute hand in the same way and reinstall it to the 12 o'clock position, and

then manually rotate the minute hand clockwise to the 12 position to confirm whether

PAGE 10 OF 12

COASTERFURNITURE.COM