Coats APX Series Entladevorgänge - Seite 3

Blättern Sie online oder laden Sie pdf Entladevorgänge für Serviceausrüstung Coats APX Series herunter. Coats APX Series 4 Seiten. Tire changer

APX80 Unload Instruction

1. Remove lag bolts holding chassis to pallet.

2. Jack up rear of machine; install axle and wheels as

shown.

3. Remove ramp planks and position as shown.

4. Jack up front of machine and install axle and

wheels as shown.

5. Slowly push machine forward to position offload

bracket over jack.

6. Jack up front of machine and slowly move machine

off pallet.

7. Locate machine in shop at proper location and

remove wheels and temporary off-load bracket.

APX80

Secure ramp planks

in position with screw

as shown.

DO NOT Fork Machine

Here: Transmission

Damages May Occur

Offload

Bracket

"X"

Remove Axles, Wheels &

Offload Bracket After

Locating In Final Position

COATS Unloading Instructions • 3

Offload

Bracket