Aktobis WDH-FF60M Betriebshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Fan Aktobis WDH-FF60M herunter. Aktobis WDH-FF60M 6 Seiten. Floor fan

Please switch off the unit immediately and disconnect it from the

mains/power supply if anything seems to be wrong !!! In this case, please

contact a specialist and do not try to repair the unit yourself !!!

Examples: Fan does not run during operation or fuse has blown.

Operational environment

The maximum operating temperature should not exceed +40°C !

The maximum relative humidity should not exceed 90% !

The unit should not be operated at altitudes higher than 1,000 metres above sea

level !

The unit was developed exclusively for indoor use and not for outdoor use !

Assembly

In order to be able to put your floor fan into operation, you must first carry out a few

more steps to finally assemble it.

Remove both the silver fan head and the frame (with wheels), as well as the two

fastening screws from the packaging.

Now place the fan head inside the frame so that

the two side fixing holes of the fan head are level

with the fixing holes of the frame.

Place the two washers between the frame and

the fan head and use the two fixing screws

supplied to mount the fan head firmly and

securely to the frame. (See illustration on the

right)

Finally, check that everything is firmly mounted

and that the airflow direction can be changed.

Instructions for use:

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de