Aktobis WDH-TW1803 Schnellstart-Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Fan Aktobis WDH-TW1803 herunter. Aktobis WDH-TW1803 10 Seiten.

Operational environment

The maximum operating temperature should not exceed +40°C !

The maximum relative humidity should not exceed 90% !

The unit should not be operated at altitudes higher than 1,000 metres above sea

level !

The unit was developed exclusively for indoor use and not for outdoor use !

Commissioning

2.1. Position the fan so that the airflow flows in the desired direction after switching on and

make sure that the fan is placed on a firm and level surface !

2.2. Now insert the mains plug properly into the socket.

2.3. The fan is switched on by pressing the On/Off button and starts by default in normal

operating mode and with low operating power.

2.4. You can set three different operating modes with the Mode button:

Nor. = Normal operation (at desired operating strength)

Nat. = Natural operationis simulated, the fan independently switches back and forth

between different operating strengths.

Sleep = alternating operation The fan switches sequentially from the highest

operating level to the medium and low operating levels. This cycle is repeated.

2.5. Use the speed button to set the desired operating strength / air circulation. (Only

possible in normal operating mode) !

You have the choice between three operating strengths:

Low = Low operating strength / air circulation

Mid. (Middle) = Average operating strength / air circulation

Hi. (High) = Highest operating strength / air circulation

Instructions for use:

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de