AeroBed R2110 AU / RDV Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Water Pump AeroBed R2110 AU / RDV herunter. AeroBed R2110 AU / RDV 8 Seiten.

Seite drucken

5. Do not store your bed folded inside sofa beds or roll-aways. This

may cause damage to your bed and will void your warranty.

6. If a mattress cover and/or valance is included with your bed, it/

they may be removed after deflation. Alternatively, you may store

your product with the mattress cover and/or valance on the bed.

Wrinkling may occur.

1. Inspect your AeroBed

2. Keep your AeroBed

not be repairable and will not be covered by your warranty.

3. When not in use, store your AeroBed

temperatures. Product must be at room temperature prior to inflating.

4. Do not store your AeroBed

cause damage to your bed that will not be covered under your warranty.

5. In case of incidental damage to your bed, a repair patch has been included.

Please follow repair instructions carefully.

Bed

We recommend that you do not let the plush surface of your AeroBed

Repeated exposure to water or other liquids may cause damage to the plush surface

that will not be covered by your warranty. Should liquid come in contact with the plush

surface, blot liquid dry and use a damp cloth to remove any stain. Let surface air

dry completely.

You may clean the PVC on the sides and bottom of your AeroBed

dishwashing detergent or household cleaner. Do not use strong chemicals or other

compounds. Allow your bed to air dry completely after cleaning and before storing.

Cover / Valance (if included)

Machine wash separately in warm using mild soap or detergent. Tumble dry on LOW

HEAT. Remove immediately after drying.

Very rarely, your AeroBed

Should this occur, please use the following check list.

1. If your AeroBed

• Make sure the Quick Release Valve is closed and

locked securely.

If the valve is open, close it by using 2 thumbs to push

cover firmly into valve. Be careful to avoid pushing valve

cover to the right or left as it snaps into valve opening.

• Make sure your bed is plugged into an active

electrical outlet.

CARE AND MAINTENANCE

product prior to each use.

product away from any sharp objects. Large cuts or snags may

product folded inside sofa beds or roll-aways. This may

TROUBLESHOOTING

product may fail to inflate properly.

product doesn't appear to be inflating:

product in a clean, dry place out of extreme

CLEANING

product get wet.

product with a mild