Aktobis WDH-MG1 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Befeuchten Aktobis WDH-MG1 herunter. Aktobis WDH-MG1 10 Seiten.

Seite drucken
Aktobis WDH-MG1 Handbuch
Steam strength
(operating
strength)
Rotation button
for steam nozzle
Timer
(Remaining
term)
Main switch
operating light
On/Off button: As soon as the blue operating light lights up in the display, you can switch on the unit with
the On/Off button. After switching on, the individual setting symbols light up.
Steam strength/operating strength: With this button you can set your individual humidification strength.
The following options are available:
One green bar:
Two green bars:
Three green bars:
Four green bars:
Five green bars:
Target humidification key: Use this key to set your individual humidification target. The following options
are available:
L
>
Lowest target humidity value (below 25%) > Not recommended
25% / 30% / 35% / 40% / 45% / 50% / 55% / 60% / 65% / 70% / 75% / 80% / 85%
H
>
Highest target humidity value (over 85%) > not recommended
The unit humidifies until the set humidity is reached and then switches off automatically. If the humidity falls
below the set target value again, the unit switches on again automatically.
Note: The humidifier's humidity sensor sits under the unit (so as to be as far away as possible from the
unit's steam outlet). Nevertheless, the humidity sensor always gives only a tendency of the room humidity.
This is because, depending on the background, the displayed value may be lower or higher than the actual
room humidity. However, by varying the target humidity value, this circumstance can be compensated for !
Functional description / control panel
>
Very weak humidification performance
>
Weak humidification performance
>
Average humidification output
>
High humidification performance
>
Maximum humidification output
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Display of the
current air humidity
On/Off button
Target humidity
button
Interval
button