AIPTEK Qt CAM FLASH Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationshandbuch für Digitalkamera AIPTEK Qt CAM FLASH herunter. AIPTEK Qt CAM FLASH 18 Seiten.

Picture resolution may only be changed when the camera memory is empty.

If there are any pictures stored in your camera, the memory must be cleared

first. To change resolution, press the mode switch until the resolution icon is

displayed. To select "Hr" or " Lr", press SW1. Then the LCD shows the

number of remaining pictures at the current setting.

Flash Strobe Button: It's on the back of your camera. Green light appears

on the square when flash strobe is activated. To activate flash strobe, move

the flash dial up.

Warning : Avoid direct exposure to eyes.

Changing the picture resolution

SW1

Change mode to "Hr" or "Lr"

"Hr" or "Lr" is displayed

Press SW1 to change resolution

On:

The flash is turned on.

Off:

The flash is turned off.

.. 6 ..