Air & Allied Sales MP-35A Gebrauchsanweisung

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Werkzeuge Air & Allied Sales MP-35A herunter. Air & Allied Sales MP-35A 11 Seiten. Air nippers

Seite drucken
　　
Use
　　To help you achieve higher productivity and remarkable cost saving in cutting , squeezing , pressing ,
bending and punching jobs for modern industries .
Product name
Model No.
・In order to prevent accidents, such as an injury, be sure to follow "attention on safe" expressed below.
･Before use -- this "attention on safe" -- use it correctly according to directions after often reading all.
･Be sure to keep it to the place where those who use are seen always after reading.
＜Before work ＞
Intercept an air source of supply at any cost at the time of air hose desorption.
①Do not use any power source except an air compressor.
･The tool is designed to operate on compressed air.
Use only air compressed by air compressors. Do not use any other power source ,
such as high pressure gas of oxygen , acetylene , propane , etc. which will cause explosive hazard .
②Use it for the work which suited the use.
･This machine is a tool in cutting, punching, pressing, bending and caulking jobs for the following.
The work subjects is copper wire , steel wire, stainless wire, piano wire, hard resin, elasticity resin and a pipe .
･Do not use it in addition to the specified use.
　If cutting beyond capability are carried out, it becomes a cause of breakage of brade,
　a breakage part should fly, and since it is dangerous, never make it absolute.
③Please do not bring a child close.
･Do not let me touch air nippers and an air hose except a worker. It becomes a cause of an injury.
･Do not bring close to a workplace except a worker. It becomes a cause of an injury.
④Keep work area clean.
･The untidy place and working table cause an accident.
･Make a workplace bright enough. A dark workplace causes an accident.
⑤Dress properly . Too large dress and long hair cause an accident.
⑥In order to protect an ear from the exhaust sound and exhaust air ,
always wear hearing protective equipment.
⑦Use protective equipment.
・Wear a protective glove.
･In cutting, please use an eye shield.
⑧Wear protectors, such as a helmet, safety shoes, and a protection-against-dust mask,
　 according to work environment.
⑨Carry out checking the following items before connecting an air hose.
･The screws of the brade attachment, the main part connection part, and the air piping part don't be loose.
･Be damaged or there need to be no detached parts.
･There need to be no parts in which rust does not operate normally owing to.
Use in the state of being abnormal is forbidden strictly. It becomes an accident and a cause of an injury.
Request repair from the purchased store or Muromoto at the time of an abrupt increase.
⑩Be careful of the following thing when you connect an air hose.
･A hand cannot be touched at a lever.
・The connector to use, please prepare a metal connector.
Please refer to PNEUMATIC CIRCUIT DIAGRAM in page 11.
⑪Connect an air hose and carry out the next check, before attaching blade etc.
･There should be neither an air leak nor unusual sound.
Use in the state of being abnormal is forbidden strictly. It becomes an accident and a cause of an injury.
Request repair from the purchased store or Muromoto at the time of an abrupt increase.
⑫Attach blade certainly according to an operation manual.
･If not certain, it will separate and will become a cause of an injury.
⑬Use appointed accessories and attachment.
･Use neither the accessories of the specification written in this operation manual and our catalog,
nor things other than an attachment. It becomes an accident and a cause of an injury.
⑭Do not use it, when blades have modification and a crack.
Instruction Manual of Air Nippers
Original instructions
Attention on safe of this product
Air & Allied Sales (Pacific) Pty Ltd
AIR NIPPER
MP-35A
WARNING
1/11
※EN ISO 11148-2:2011
www.air-allied.com.au